CLAMPINE TL
Installation of work platforms - roof battens
Device description:
The CLAMPINE TL is a device that allows for the temporary installation of work platforms on sloped roofs covered with roof tiles. The device is mounted directly on the roof battens after removing a few roof tiles—it is necessary to expose two battens across a width of approximately 30 cm. The device is mounted on battens spaced between 300 mm and 430 mm apart.
SAFETY LOCK
Protection against accidental opening via a safety button.
ANGLE OF INCLINATION
Adjustment of the working platform's tilt angle.
INCLINATION RANGE
25 - 55 degrees
BATTEN SPACING
300 mm - 430 mm
DEVICE LOAD CAPACITY
UP TO 200 KG
APPLICATIONS
, WORK PLATFORMS
ROOFING TYPE
ROOF TILE
Installation of the device
The CLAMPINE TL device is mounted by attaching the clamps to the roof batten. To secure the device to the batten, the batten’s thickness must not exceed 60 mm. For added security, it is recommended to secure the device with screws through the designated holes in the base. The cradle’s level is adjusted using a wing screw by selecting the appropriate locking hole.
Clampine TL Application Example
